The CAS Mix UP
August Challenge is Alcohol Inks. So many beauties already by the DT , our GD and in the Gallery!
Here is my "Alcohol Inks on Acetate" Christmas Card!
Close Up!
Alcohol Inks on Acetate with Tissue Paper Background is one of my favorite Alcohol Ink techniques.
Here is the link to my 1st card in my blog using this technique. I am going to condense the steps in this post.
Step1: cut piece of aluminum foil approximately 8" x11" and lay on craft sheet.
Step 2: drizzle alcohol ink onto foil and spritz with Blending Solution or 90% rubbing alcohol.
Step 3: pre-cut acrylic sheets..I used 4" x 4" and 6" x 6" squares. Smoosh onto spritzed alcohol inks until you are happy with results. You can spritz with solutions more if inks dry too quickly. Lay aside piece to dry with alcohol side UP. Can add more ink to foil to make more backgrounds.
Do not throw away foil. Can be used for another technique that I will share in a future post that I learned from my friend
Christine :-)
Step 4: When piece dries use foam brush to Paint ON Alcohol Ink Side the Gel Medium or Modge Podge (optional..pinch of Dazzling Diamonds or fine glitter to lightly sprinkle onto wet glue) then scrunch up a pre-cut (6x6 or 8x8) White tissue paper and open tissue leaving the scrunched wrinkles and place over wet glue. Rub with your hands for good contact. Turn over piece onto clean paper towel and press more with hands. Carefully add more glue on edges if necessary. If glue smudges appear on the acrylic side remove using paper towel and 90% rubbing alcohol.
Step 5: Set aside and let glue dry. Then trim tissue with your scissors. Check for more glue smudges and remove with alcohol. Then you can stamp images or sentiments, etc using Stazon ink. Other permanent inks smear.
I actually made my background for the trees in this card at our Retreat in BC and borrowed the tree dies from Loll. Thank you again Loll for sharing. The dies set is on my wishlist!
I finished my card at home using CUTplorations Crazy Double Running Stitch Rectangle Die for the popped up layer frame. Then scrunched up a piece of tissue and glued to a CUTplorations ATC Tag builder Die.
I glued on my larger tree to the tissue 1st then popped up my small tree. Added a stamped sentiment and done. I LOVE how the trees have a shiny stained glass look:-)
I am so pleased with the CAS design and plan to make duplicates using alcohol backgrounds from my stash:-) You can never make just one background using this technique! You still have until the 24th to play along in our August
CAS Mix Up Challenge.
Happy Alcohol Ink stamping my friends. Hugs..
Supplies:
Stamps: SU Be Very Merry (ret)
Paper: SU Thick Whisper White and Reg. W.W. White Tissue Paper
Inks: Tim Holtz Alcohol Inks and Pinata Gold Alcohol Ink. Archival Black Ink.
Accessories: Impression Obsession Fir Trees Die, CUTplorations ATC Tag Builder and Crazy Double Running Stitch Rectangles Dies. Acetate Sheet, Tombow liquid glue, dimensionals.